 |
SH-1
SH-1 CNC COILING MACHINE FOR ULTRA FINE WIRE
With its 6-axis Servomotor CNC versatility, proven stability and cost performance, the SH-1 coiling machine for ultra fine wire can produce springs from 0.02-0.1mm (0.0008-0.004"). This machine is meticulously designed to meet the demands inherent in single-point fine wire coiling applications.
|
Machine Specifications
|
 |
| Right Hand Coil Standard |
|
| Wire diameter: |
|
0.02-0.1mm (0.0008-0.004") |
|
| Outer diameter: |
|
2mm (0.078") |
|
| Wire Feed Axis Resolution: |
|
0.01mm (0.0004") |
|
| Pitch Axis Resolution: |
|
0.1µm (0.0001mm (0.000004")) |
|
| Coil Diameter Axis Resolution: |
|
0.2µm (0.0002mm (0.000008")) |
|
| Arbor In/Out Axis Resolution: |
|
0.1µm 0.2µm (0.0002mm (0.000008")) |
|
| Initial Tension Axis Resolution: |
|
0.2µm (0.0002mm (0.000008")) |
|
| Cutter Axis Resolution: |
|
0.1° |
|
| Power Requirements: |
|
200V, 3 phase, 15A |
|
| Air Requirements: |
|
3.1kg/cm² (44psi) |
|
| Weight: |
|
320kg (705lbs) |
|
View spec sheet for SH-1 Spring Machine (PDF 764K).
Request a quote or ask a question about the SH-1 Spring Machine.
|
|
|
