Our standard machine for producing extended loops.

A dedicated machine for the high-speed production of extension springs,

the CLS-10V transfers strings produced after coiling and performs formation and product checks at each stage.

CLS-10Vの写真

  • Enables high-speed production of extension springs with a beautiful hook shape.

    -A dedicated machine for extension springs with a wire diameter of 0.12 mm to 1.0 mm.

    -Produces a more beautiful hook shape than any other machine.

    -Enables a much higher speed of production than general torsion machines.

    -Programs for a wide variety of hooks are provided.

  • Beautiful hook shape

    The CLS-10V can produce English hooks, German hooks, U hooks, side hooks, and Indian hooks.

    -Enables creation of extended hooks in which the two hooks are wound together neatly.

    -Enables processing without a straight line at the end of the cut.

    -Enables processing without an opening at the end of the cut.

  • High-speed production

    Maximum production speed of 120 items per minute – a much greater production volume than standard (quill type) torsion machines.

  • Optional Equipment

    IS-1X shape detection unit with camera

    6-point simultaneous measurement with 2 cameras

Wire Diameter 0.12~1.0mm(.0047-.0394'') (See Note) Feed Axis Motor 600W AC Servo Motor
Outside Coil Diameter 1~12mm(.0394-.4724'') Cam Axis Motor 750W AC Servo Motor
Spring Length 3.0~100mm(.0984-3.937'') Power Supply AC200V, 20A, 3phase
Direction of Helix Clockwise Solenoid Valves 4pcs
Maximum Feed Length 9999mm(393.66'') Air Requirements 0.5MPa(5.1㎏f/c㎡)
Production Speed 120ppm at max. Weight 440㎏(970lbs)
〔Note〕 For wire diameter from 0.9 ~ 1.0mm, D/d must be greater than 6.
Oriimec Corporation of America
1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
Tech. Support : 1-(859)746-3314
Parts&Others : 1-(859)746-3316
Fax: 1-(859) 746-3319