The LCC 92HT is an NC Straightener feeder that provides everything that users at stamping sites could need.

The stock size is limited to 250 mm(9″) or less, enabling costs to be reduced to a dramatic extent that has never been seen before.

Take a look at this unprecedented cost performance.

LCC 92HTの写真

  • TP-CCS & Allen-Bradley Controler

    A wide variety of information needed for planning, operation, maintenance, etc, is uniformly controlled under the base mode of “Settings, Planning, Operaion, and Maintenance”. Equipped with various new operations, it is a complete operation system that responds to diversification and sophistication of merchandise and reduction of work time.

    Customer can choose our original TP-CCS or Allen-Bradley  Control system.

    TP-CCS Controller

    Allen-Bradley  Controle

  • Large straightening roll adjustment wheel

    Large straightening roll adjustment hand wheel have been adopted. Symbols are used for the indicators, improving repeatability and permitting easy numerical setting.

  • Space-saving design

    This design requires approximately 15% less installation space for the straightener (compared to previous Oriimec models). The efficient use of space enabled by this downsizing allows safer and more efficient work.

  • Includes high output AC servo motor

    The straightener/feeder, the heart of the unit, includes a 4.4 kW AC servo unit with a high output usually seen only in larger models.

Stock Thickness mm(inch) 1.2~6.0(0.047~0.236)
Stock Width mm(inch) 70~250(2~9)
MAX.Coil Mass kg(lb) 2,500(5,512)
MAX.Coil O.D. mm(inch) 1,400(55)
Coil I.D. mm(inch) 508(20)
Feed Length mm(inch) ~500※(~19)
MAX.Line Speed m/min(ft/min) 22(72)
Work Roll Number upper3/lower2
Main Motor kw AC4.4
Mandrel Expansion pneumatic
Reel Motor kw 2.2
Power V 200/220
Operating Air Mpa(PSI) 0.49(71)

※In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option) must be provided.

Stock Thickness mm(inch)
1.2~5.0(0.047~0.197) 6.0(0.236)
Stock Width mm(inch) 250(9) 200(7)

※The above figures are for the material having yield strength of 35500PSI.

  • Maximizes downsizing
    Stock width: 50 mm(1") to 300 mm(11") Maximum stock thickness: 3.2 mm(0.126")
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • Includes the first ASC mechanism in the industry for enhanced performance
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • A product line with enhanced economic efficiency
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 3.2 mm(0.126")
  • The HF series' high-performance model
    Maximum stock width: 400 mm(15") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 3.2 mm(0.126")
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • Automates threading of coiled strips and loop production of stock
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 6.0 mm(0.236")
  • Our best selling model in the mid-range thickness class
    Maximum stock width: 400 mm(15") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Advanced flattening enables straightening of high‐tensile steel
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Top-of-the-line model with highly advanced performance
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 9.0 mm(0.354")
  • The highest productivity in this line
    Maximum stock width: 500 mm(19") to 800 mm(31") Maximum stock thickness: 12.0 mm(0.472")
  • Oriimec Corporation of America
    1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
    TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
    Tech. Support : 1-(859)746-3314
    Parts&Others : 1-(859)746-3316
    Fax: 1-(859) 746-3319