This equipment can handle plate with a thickness of up to 12.0 mm(0.472″).

These super machines are the most advanced equipment of the series.

Their sturdy form symbolizes their superior performance and tremendous reserves power.

LCC GD/GD2 Seriesの写真

  • TP-CCS & Allen-Bradley Controler

    A wide variety of information needed for planning, operation, maintenance, etc, is uniformly controlled under the base mode of “Settings, Planning, Operaion, and Maintenance”. Equipped with various new operations, it is a complete operation system that responds to diversification and sophistication of merchandise and reduction of work time.

    Customer can choose our original TP-CCS or Allen-Bradley  Control system.

    TP-CCS Controller

    Allen-Bradley  Controler

  • GD2

    A renewed lineup with a full complement of NC straightener feeder for thick stock. Nine-work roll specifications.

  • Easy Access to Work Rolls (LCC06GD2)

    The work rolls on the GD2 can be opened to a maximum of 20 degrees, making roll cleaning much easier. The machine was designed to allow easy access to the inside structure for improved maintenance.

  • 9 Work Rolls (LCC06GD2)

    The GD2 represents a new standard in feeding technology, with the ability to handle plate up to 12.0mm(0.472″) thick. Combining the power of the heavy-duty GD unit with the straightening performance of 9 work rolls (5 upper and 4 lower), the GD2 gives material a high degree of flatness.

Model LCC 05GD LCC 08GD LCC 06GD2
Stock Width mm(inch) 70~500(2~19) 70~800(2~31) 70~600(2~23)
Stock Thickness mm(inch) 1.4~12.0(0.055~0.472) 1.4~12.0(0.055~0.472) 1.4~12.0(0.055~0.472)
MAX.Coil Mass kg(lb) 5,000(11.025) 5,000(11.025) 5,000(11.025)
MAX.Coil O.D. mm(inch) 1,600(62) 1,600(62) 1,600(62)
Coil I.D. mm(inch) 508(20) 508(20) 508(20)
Feed Length mm(inch) ~500(~19) ~500(~19) ~500(~19)
MAX.Line Speed m/min(ft/min) 16(52) 16(52) 18(59)
Work Roll Number upper3/lower3 upper3/lower3 upper5/lower4
Main Motor (kw) 15.0 15.0 30.0
Mandrel Expansion hydraulic hydraulic hydraulic
Reel Motor (kw) 3.7 3.7 5.5
Power (V) 200/220 200/220 200/220
Operating Air Mpa(PSI) 0.49(71) 0.49(71) 0.49(71)

※:In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option) must be provided.

Model LCC 05GD LCC 08GD LCC 06GD2
Roll length mm(inch) 520(20) 820(32) 620(24)
Stock Thickness
mm(inch)
1.4~4.5(0.055~0.177) 500(19) 800(31) 600(23)
5.0(0.197)
6.0(0.236)
7.0(0.275) 760(29)
8.0(0.314) 610(23)
9.0(0.354) 480(18) 480(18) 480(18)
10.0(0.393) 390(15) 390(15) 390(15)
11.0(0.432) 320(12) 320(12) 320(12)
12.0(0.472) 270(10) 270(10) 270(10)

※The above figures are for the material having yield strength of 35500PSI.

  • Maximizes downsizing
    Stock width: 50 mm(1") to 300 mm(11") Maximum stock thickness: 3.2 mm(0.126")
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • Includes the first ASC mechanism in the industry for enhanced performance
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • A product line with enhanced economic efficiency
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 3.2 mm(0.126")
  • The HF series' high-performance model
    Maximum stock width: 400 mm(15") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 3.2 mm(0.126")
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • The best match for small, thick stock
    Stock width: 70 mm(2") to 250 mm(9") Maximum stock thickness: 6.0 mm(0.236")
  • Automates threading of coiled strips and loop production of stock
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 6.0 mm(0.236")
  • Our best selling model in the mid-range thickness class
    Maximum stock width: 400 mm(15") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Advanced flattening enables straightening of high‐tensile steel
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Top-of-the-line model with highly advanced performance
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 9.0 mm(0.354")
  • Oriimec Corporation of America
    1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
    TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
    Tech. Support : 1-(859)746-3314
    Parts&Others : 1-(859)746-3316
    Fax: 1-(859) 746-3319