This series handles material from 600m(23″)m to 1,300mm(51″) wide and up to 6.0mm(0.236″) thick.

The 11 work rolls enable an extraordinary level of flatness for materials.

LCC HL Seriesの写真

  • High Degree of Flatness

    Combining the power of the heavy duty HL unit with the straightening performance of 11 work rolls (6 upper and 5 lower), the HL unit gives material a high degree of flatness to materials up to 6.0mm(0.236″) thick.

  • Easy Access to Work Rolls

    The work rolls on the HL can be opened to a maximum of 20 degree, making roll cleaning much easier. The machine was designed to allow easy access to the inside structure for improved maintenance.

  • Work Rolls Drive System

    ■Side Gear System

    The feed roll is equipped with gears that drive each roll, making the lower work rolls run.

    ■All Rolls Driven with Universal Joint System

    This system makes all rolls through universal joints which connect each roll by a motor-driven parallel gear box. This system is especially recommended for both high tension materials and easy-to-slip materials.

  • TP-CCS & Allen-Bradley Controler

    A wide variety of information needed for planning, operation, maintenance, etc, is uniformly controlled under the base mode of “Settings, Planning, Operaion, and Maintenance”. Equipped with various new operations, it is a complete operation system that responds to diversification and sophistication of merchandise and reduction of work time.

    Customer can choose our original TP-CCS or Allen-Bradley  Control system.

    TP-CCS Controller

    Allen-Bradley  Controler

  • High torque / high rigidity

    All rolls drive system (HLU model) * and frame rigidity improvement (four times higher than the conventional equipment) have enabled straightening of high-tensile steel.

    * Refer to the work roll drive system

Model 06HLS 08HLS 10HLS 13HLS 06HLU 08HLU 10HLU 13HLU
Stock Thickness inch 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236
Stock Width inch 2~23 2~31 2~39 2~51 2~23 2~31 2~39 2~51
MAX.Coil Mass lb 6,615 11,025 15,435 15,435 6,615 11,025 15,435 15,435
MAX.Coil O.D. inch 55 55 55 55 55 55 55 55
Coil I.D. inch 20 20 20 20 20 20 20 20
Feed Length(※) inch ~19 ~19 ~19 ~19 ~19 ~19 ~19 ~19
MAX.Line Speed ft/min ~72 ~72 ~72 ~72 ~72 ~72 ~72 ~72
Work Roll Number upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5
Main Motor kW AC11.0 AC11.0 AC11.0 AC11.0 AC30.0 AC30.0 AC30.0 AC30.0
Mandrel Expansion pneumatic pneumatic hydraulic hydraulic pneumatic pneumatic hydraulic hydraulic
Reel Motor kW 2.2 2.2 3.7 3.7 2.2 2.2 3.7 3.7
Power v 200/220 200/220 200/220 200/220 200/220 200/220 200/220 200/220
Operating Air PSI 71 71 71 71 71 71 71 71

※:In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option) must be provided.

Straightening Performance Stock Width (inch)
Model 06HLS 08HLS 10HLS 13HLS 06HLU 08HLU 10HLU 13HLU
Stock Thickness
(inch)
0.031~0.090 23 31 39 51 23 31 39 51
0.110 36 36 36 36
0.126 28 28 28 28 28 28
0.157 17 17 17 17 18 18 18 18
0.177 14 14 14 14 14 14 14 14
0.197 11 11 11 11 11 11 11 11
0.236 7 7 7 7 8 8 8 8

●The above figures are for the material having yield strength of 35500PSI max.


Straightening Performance
(For High tention materials)
Stock Width (inch)
Model 06HLS 08HLS 10HLS 13HLS 06HLU 08HLU 10HLU 13HLU
Stock Thickness
(inch)
0.090 10 9 9 9 21 21 21 21
0.098 9 9 8 8 18 18 18 18
0.110 8 7 7 7 14 14 14 14
0.126 6 6 6 6 11 11 11 11
0.157 5 5 5 5 7 7 7 7
0.177 4 4 4 4 5 5 5 5
0.197 4 4 4 4 4 4 4 4
0.236 3 3 3 3 3 3 3 3

※The above figures are for the material having yield strength of 87000PSI max.
※ Specifications are subject to change for improvement without notice.

  • Maximizes downsizing
    Stock width: 50 mm(1") to 300 mm(11") Maximum stock thickness: 3.2 mm(0.126")
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • Includes the first ASC mechanism in the industry for enhanced performance
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • A product line with enhanced economic efficiency
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 3.2 mm(0.126")
  • The HF series' high-performance model
    Maximum stock width: 400 mm(15") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 3.2 mm(0.126")
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • The best match for small, thick stock
    Stock width: 70 mm(2") to 250 mm(9") Maximum stock thickness: 6.0 mm(0.236")
  • Automates threading of coiled strips and loop production of stock
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 6.0 mm(0.236")
  • Our best selling model in the mid-range thickness class
    Maximum stock width: 400 mm(15") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Top-of-the-line model with highly advanced performance
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 9.0 mm(0.354")
  • The highest productivity in this line
    Maximum stock width: 500 mm(19") to 800 mm(31") Maximum stock thickness: 12.0 mm(0.472")
  • Oriimec Corporation of America
    1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
    TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
    Tech. Support : 1-(859)746-3314
    Parts&Others : 1-(859)746-3316
    Fax: 1-(859) 746-3319