Forming the future for straightener/feeders

The straightening roll adjustment wheel has disappeared!
Oriimec has redefined press automation with the LCC SA coil straightening-feeding machine, fitted with all new technologies, including the first ever Active Straightening Correction (ASC) mechanism.
The LCC SA represents a revolution in new technology for the metal stamping floor.

LCC SA Coil Straightener-Feederの写真

  • Active Straightening Correction (ASC)

    Given the difference in coil at the beginning of a roll and the end of a roll, it is usually necessary for an operator to always be monitoring straightening operations, and to manually carry out corrections to ensure a high degree of precision in straightening. With the unique ASC mechanism fitted on the LCC SA Series coil straightener-feeder, changes in the coil outside diameter are detected during production. Straightening correction is performed continuously and automatically. Thanks to this innovation, the burden on line operators is reduced, meaning they do not have to be permanently by the machine, thus making a significant contribution to operational efficiency.

    【Problem solutions】

    ・Operators can monitor other lines

    ・Operators can multi-task

    ・Cost reduction

  • Fitted with 11 rolls

    The LCC SA Series coil straightening-feeder machine’s ability to provide superior flatness comes from the 6 upper and 5 lower work rolls with a diameter of 48mm(1.8″) each. This construction, together with the ASC function, further enhances the reliability of straightening.

  • Lift and Roll Easy Open Function

    Work roll and feed roll are automatically fed into the port opening. In previous models of coil straightening-feeder machines, only one side of the feeder opened, limiting the size of the port and making maintenance of the inner components difficult. With the new Lift and Easy Open Function of the LCC SA Series, the port opening is a maximum 140mm, making cleaning of rolls even easier.

  • TP-CCS Controller

    A wide variety of information needed for planning, operation, maintenance, etc., is uniformly controlled under the base mode of “Settings, Planning, Operation, and Maintenance.” Equipped with various new operations, it is a complete operating system that responds to diversification and sophistication of merchandise and reduction of work time.

    Learn more about the TP-CCS controller

Model LCC03SA LCC04SA
Stock Width mm(inch) 50~300(1~11) 50~400(1~15)
Stock Thickness mm(inch) 0.3~3.2(0.012~0.126)
MAX.Coil Mass kg(lb) 2,000(4,410)
MAX.Coil O.D. mm(inch) 1,200(47)
Coil I.D. mm(inch) 508(20)
Feed Length mm(inch) *1~300(~11)
MAX.Line Speed m/min(ft/min) ~16(52)
Release-follow Speed MAX. (spm) 180
Work Roll Number upper6/lower5
Main Motor (kw) AC2.0
Mandrel Expansion Pneumatic/(Manual)
Reel Motor (kw) 0.75
Power (V) 200/220
Operating Air Mpa(PSI) 0.49(71)

*1:In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option) must be provided.

Stock Thickness LCC03SA LCC04SA
0.3(0.012) 300(11) 400(15)
0.4(0.016)
0.6(0.024)
0.8(0.031)
1.0(0.039)
1.2(0.047) 339(13)
1.4(0.055) 279(10)
1.6(0.063) 277(10) 238(9)
1.8(0.071) 238(9) 208(8)
2.0(0.079) 210(8) 185(7)
2.3(0.090) 178(7) 159(6)
2.8(0.110) 137(5) 128(5)
3.2(0.126) 105(4) 105(4)

※The above figures are for the material having yield strength of 35500PSI max(tensile strength of 56800PSI).

  • Coil straightener-feeder maximizes floorspace
    Stock width: 50 mm(1") to 300 mm(11") Maximum stock thickness: 3.2 mm(0.126")
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • Coil line system for enhanced economic efficiency
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 3.2 mm(0.126")
  • High-performance coil straightener-feeder
    Maximum stock width: 400 mm(15") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • 11 work rolls to enable high-accuracy coil straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 3.2 mm(0.126")
  • 11 work rolls enhance coil straightening capabilities
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • The best coil straightener-feeder for small, thick stock
    Stock width: 70 mm(2") to 250 mm(9") Maximum stock thickness: 6.0 mm(0.236")
  • Automates threading of coiled strips and loop production of stock
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 6.0 mm(0.236")
  • Our best-selling straightener-feeder in the mid-range thickness class.
    Maximum stock width: 400 mm(15") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Advanced flattening enables straightening of high‐tensile steel
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Top-of-the-line coil line system with highly advanced performance
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 9.0 mm(0.354")
  • Coil line system offering the highest productivity
    Maximum stock width: 500 mm(19") to 800 mm(31") Maximum stock thickness: 12.0 mm(0.472")
  • Oriimec Corporation of America
    1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
    TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
    Tech. Support : 1-(859)746-3314
    Parts&Others : 1-(859)746-3316
    Fax: 1-(859) 746-3319