For the LCE HR3 series of coil straightener-feeders, simple button operations can make coil material threading and material loop formation automatic. This is a state-of-the-art straightener-feeder that achieves both improvements in work setups and a high level of economic performance. A wide range of specifications can be handled, including material widths of 100 mm (3″) to 600mm (23″) and sheet thicknesses of 1.0 mm (0.039″) to 6.0mm (0.236″). Furthermore, the reduction of setup times has also been thoroughly pursued, through the addition of a double uncoiler-type of device. The LCE HR3 coil straightener-feeders offer high-performance coil processing for a variety of metal stamping operations.

LCE HR3 Coil Straightener-Feedersの写真

  • Reduction of setup times and improvement of workability and safety

    Materials mounted on the uncoiler are automatically threaded up to the straightener exit side until a loop shape is formed, and this leads to shorter setup times. Furthermore, in order to carry out the smooth threading of materials, an auxiliary coil press for preventing coil bulges has been installed as a standard part of the equipment. Also, the pressing of coil material perimeters at four points prevents looseness at the time of coil insertion.

  • Improved ease of maintenance and economic performance

    The LCE HR3 coil straightener-feeder features a new mechanical system that uses air pressure instead of oil for the actuator, improving ease-of-maintenance and performance.

  • Adoption of PLC control

    The LCE HR3 coil straightener-feeder includes a programmable logic controller (PLC) that provides versatility and responsiveness to changing production requirements.

Model 04HR3E 04HR3V 05HR3E 05HR3V 06HR3E 06HR3V
Stock Width inch 3~15 3~15 3~19 3~19 3~23 3~23
Stock Thickness Automatically Feed inch 0.039~0.236 0.039~0.236 0.039~0.236 0.039~0.236 0.039~0.236 0.039~0.236
Manual Feed 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236 0.024~0.236
MAX.Coil Mass Single lb 6,615 11,025 6,615 11,025 6,615 11,025
Double 6,615×2 11,025×2 6,615×2 11,025×2 6,615×2 11,025×2
MAX.Coil O.D. inch 55 55 55 55 55 55
Coil I.D. inch 20 20 20 20 20 20
Feed Length(※) inch ~19 ~19 ~19 ~19 ~19 ~19
Work Roll Number upper4/lower3 upper4/lower3 upper4/lower3 upper4/lower3 upper4/lower3 upper4/lower3
Mandrel Expansion pneumatic pneumatic pneumatic pneumatic pneumatic pneumatic
Power V 200/220 200/220 200/220 200/220 200/220 200/220
Operating Air PSI 71 71 71 71 71 71

(※):In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option) must be provided.

Stock Width (inch)
Model 04HR3E 04HR3V 05HR3E 05HR3V 06HR3E 06HR3V
Stock Thickness
(inch)
0.024~0.063 15 15 19 19 23 23
0.079
0.090
0.098
0.110
0.126
0.157 17 17 17 17
0.177 14 14 14 14 14 14
0.197 11 11 11 11 11 11
0.236 7 7 7 7 7 7

※The above figures are for the material having yield strength of 35500PSI max.

  • Coil straightener-feeder maximizes floorspace
    Stock width: 50 mm(1") to 300 mm(11") Maximum stock thickness: 3.2 mm(0.126")
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • Coil straightener-feeder includes first automated straightening mechanism in industry
    Maximum stock width: 300 mm(11"), 400 mm(15") Maximum stock thickness: 3.2 mm(0.126")
  • Coil line system for enhanced economic efficiency
    Maximum stock width: 400 mm(15") to 600 mm(23") Maximum stock thickness: 3.2 mm(0.126")
  • High-performance coil straightener-feeder
    Maximum stock width: 400 mm(15") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • 11 work rolls to enable high-accuracy coil straightening
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 3.2 mm(0.126")
  • 11 work rolls enhance coil straightening capabilities
    Maximum stock width: 500 mm(19") to 1,000 mm(39") Maximum stock thickness: 4.5 mm(0.177")
  • The best coil straightener-feeder for small, thick stock
    Stock width: 70 mm(2") to 250 mm(9") Maximum stock thickness: 6.0 mm(0.236")
  • Our best-selling straightener-feeder in the mid-range thickness class.
    Maximum stock width: 400 mm(15") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Advanced flattening enables straightening of high‐tensile steel
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 6.0 mm(0.236")
  • Top-of-the-line coil line system with highly advanced performance
    Maximum stock width: 600 mm(23") to 1,300 mm(51") Maximum stock thickness: 9.0 mm(0.354")
  • Coil line system offering the highest productivity
    Maximum stock width: 500 mm(19") to 800 mm(31") Maximum stock thickness: 12.0 mm(0.472")
  • Oriimec Corporation of America
    1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
    TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
    Tech. Support : 1-(859)746-3314
    Parts&Others : 1-(859)746-3316
    Fax: 1-(859) 746-3319