The large-scale coil feeder line supports today’s high-tensile steel with

stock widths up to 1,900 mm(74″) and stock thicknesses up to 6.0 mm(0.236″).

It also includes, hands free coil setting, shearing capabilities, and rewinding of unwound stock.

In addition to blanking presses, this technology is utilized in cut to length lines,

and is well received by customers not only in Japan but around the world.

Large-Scale Coil Feeder Lineの写真

  • Straightener

    This product supports a wide range of today’s high‐tensile steel that are experiencing increasing demand. Straightening is performed automatically (by job recipe), a wide variety of motor capacities are available to accurately meet customer needs for coil flatness. Roll top opening mechanism (up to 300 mm(11″) opening) is provided as a standard feature to improve productivity for maintenance.

  • Feeder/controller

    For this product, we drew on our extensive track record and experience to provide optimal feed control. A measure roll (provided as a standard feature) also enables high feed accuracy. (PLC manufactured by Mitsubishi Electric; motor manufactured by Yaskawa Electric.)

  • Hands Free (loading, peeling, threading)

    An automatic coil threading function is included as a standard feature for the processes from loading to threading to meet customer needs for rationalization and reduction of preparation time.

  • Other standard items

    A hydraulic crop shear is provided as a standard feature, and a double skid car enables incomplete coils to be unloaded, allowing preparation for the next coil to be rationalized. A movable end feeder is also provided as a standard feature to enable coils to be used right up to the ends.

Model HTL17 HTL19
Stock Width mm(inch) 300~1,700 (11~66) 300~1,900 (11~74)
Stock Thickness mm(inch) 0.6~3.2 (0.024~0.126) 0.6~3.2 (0.024~0.126)
Coil Mass kg(lb) Max. 15,000 (33,069) Max. 15,000 (33,069)
Coil O. D. mm(inch) 700~1,800 (27~70) 700~1,800 (27~70)
Coil I. D. mm(inch) 508 (20) 508 (20)
Feed Length mm(inch) Max. 2,000 (78) Max. 2,000 (78)
Line Speed m/min(ft/min) Max. 45 (147) Max. 45 (147)
Number of Work Rolls upper 5 / lower 6 upper 5 / lower 6
PLC MITSUBISHI MITSUBISHI
Straightener Motor Power kW YASKAWA 55 YASKAWA 55
Mandrel Expansion Hydraulic Hydraulic
Power V 200/220 50/60 Hz
400/440 50/60 Hz
200/220 50/60 Hz
400/440 50/60 Hz
Operating Air Mpa(PSI) 0.49 (71) 0.49 (71)

Tensile strength
56800PSI 71000PSI 85200PSI 99400PSI 113700PSI
Yield point stress 35500PSI 44300PSI 53200PSI 62000PSI 71000PSI
Stock Thickness
mm(inch)
0.6(0.024) 1,900(74) 1,900(74) ※1,900(74) ※1,900(74) ※1,900(74)
1.0(0.039) 1,900(74) 1,900(74) 1,900(74)
1.2(0.047)
1.6(0.063)
2.3(0.090) 1,860(73) 1,450(56)
2.8(0.110) 1,493(58) 1,167(45)
3.2(0.126) 1,667(65) 1,284(50) 1,005(39)

Note: The tensile strength is the reference value calculated based upon the yield point stress.
   Check straightening performance in accordance with the yield point stress.
Note:※ Flatness may be unobtainable with the value.

  • Oriimec Corporation of America
    1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
    TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
    Tech. Support : 1-(859)746-3314
    Parts&Others : 1-(859)746-3316
    Fax: 1-(859) 746-3319