Our PQ Series of large-scale straightener/feeders supports stock widths of

up to 1,500 mm(58″), 1,700 mm(66″), or 1,900 mm(74″), and stock thicknesses of up to 3.2 mm(0.126″).

Coils can also be automatically inserted (loaded and threaded) as with a coil feeder line (optional).

Large-Scale Straightener/Feederの写真

  • Includes roll open mechanism

    A maximum opening of 20 degrees is possible, centered on the eccentric shaft on the exit side. The large opening area enables easy roll cleaning, and internal mechanisms are bright and easy to check, greatly improving maintenance.

  • 9 work rolls

    This product has 9 work rolls, enabling a wide range of stock to be supported while also allowing a generous maximum thickness of 3.2 mm(0.126″). With 9 rolls, this product takes flatness to the next level.

PQS Series (side gear drive)

Model LCC15PQS LCC17PQS LCC19PQS
Stock Width mm(inch) 300~1,500 (11~59) 300~1,700 (11~66) 300~1,900 (11~74)
Stock Thickness mm(inch) 0.8~3.2 (0.031~0.126) 0.8~3.2 (0.031~0.126) 0.8~3.2 (0.031~0.126)
Coil Mass kg(lb) Max.10,000 (22,046)
Max. 10,000 (22,046)
without mandrel support
Max.15,000 (33,069)
Max. 15,000 (33,069)
with mandrel support
Max.15,000 (33,069)
Max. 15,000 (33,069)
with mandrel support
Coil O. D. mm(inch) 700~1,500 (27~59) 700~1,500 (27~59) 700~1,500 (27~59)
Coil I. D. mm(inch) 508 (20) 508 (20) 508 (20)
Feed Length mm(inch) Max.1,000 (39) Max.1,000 (39) Max.1,000 (39)
Line Speed m/min(ft/min) Max.30 (98) Max.30 (98) Max.30 (98)
Number of Work Rolls upper 5 / lower 4 upper 5 / lower 4 upper 5 / lower 4
PLC MITSUBISHI MITSUBISHI MITSUBISHI
Mandrel Expansion Hydraulic Hydraulic Hydraulic
Power V 200/220 50/60 Hz
400/440 50/60 Hz
200/220 50/60 Hz
400/440 50/60 Hz
200/220 50/60 Hz
400/440 50/60 Hz
Operating Air Mpa(PSI) 0.49 (71) 0.49 (71) 0.49 (71)

PQU Series (universal joint drive)

Model LCC15PQU LCC17PQU LCC19PQU
Stock Width mm(inch) 300~1,500 (11~59) 300~1,700 (11~66) 300~1,900 (11~74)
Stock Thickness mm(inch) 0.8~3.2 (0.031~0.126) 0.8~3.2 (0.031~0.126) 0.8~3.2 (0.031~0.126)
Coil Mass kg(lb) Max.10,000 (22,046)
Max. 10,000 (22,046)
without mandrel support
Max.15,000 (33,069)
Max. 15,000 (33,069)
with mandrel support
Max.15,000 (33,069)
Max. 15,000 (33,069)
with mandrel support
Coil O. D. mm(inch) 700~1,800 (27~59) 700~1,800 (27~59) 700~1,800 (27~59)
Coil I. D. mm(inch) 508 (20) 508 (20) 508 (20)
Feed Length mm(inch) Max.1,500 (59) Max.1,500 (59) Max.1,500 (59)
Line Speed m/min(ft/min) Max.40 (131) Max.40 (131) Max.40 (131)
Number of Work Rolls upper 5 / lower 4 upper 5 / lower 4 upper 5 / lower 4
PLC MITSUBISHI MITSUBISHI MITSUBISHI
Mandrel Expansion Hydraulic Hydraulic Hydraulic
Power V 200/220 50/60 Hz
400/440 50/60 Hz
200/220 50/60 Hz
400/440 50/60 Hz
200/220 50/60 Hz
400/440 50/60 Hz
Operating Air Mpa(PSI) 0.49 (71) 0.49 (71) 0.49 (71)

Note: The above table is applied to the pit specifications.

LCC19PQS

Tensile strength
56800PSI 71000PSI 85200PSI 99400PSI 113700PSI
Yield point stress 35500PSI 44300PSI 53200PSI 62000PSI 71000PSI
Stock Thickness
mm(inch)
0.8(0.031) 1,900(74) ※1,900(74) ※1,900(74) ※1,900(74) ※1900(74)
1.0(0.039) 1,900(74) ※1,700(66)
1.2(0.047) 1,900(74) 1,810(71) ※1,400(55)
1.6(0.063) 1,780(69) 1,340(52) 1,040(40)
2.3(0.090) 1,670(65) 1,200(47) 900(35) 700(27)
2.8(0.110) 1,340(52) 960(37) 730(28) 570(22)
3.2(0.126) 1,580(62) 1,150(45) 830(32) 630(24) 490(19)

LCC19PQU - for the multi-servo 55kW x 3 units (165kW) / option

Tensile strength
56800PSI 71000PSI 85200PSI 99400PSI 113700PSI
Yield point stress 35500PSI 44300PSI 53200PSI 62000PSI 71000PSI
Stock Thickness
mm(inch)
0.8(0.031) 1,900(74) ※1,900(74) ※1,900(74) ※1,900(74) ※1,900(74)
1.0(0.039) 1,900(74) 1,900(74)
1.2(0.047)
1.6(0.063) 1,900(74) 1,900(74)
2.3(0.090) 1,750(68) 1,530(60)
2.8(0.110) 1,650(64) 1,370(53) 1,180(46) 1,030(40)
3.2(0.126) 1,580(62) 1,260(49) 1,050(41) 900(35) 790(31)

Note: The tensile strength is the reference value calculated based upon the yield point stress.
   Check straightening performance in accordance with the yield point stress.
Note: ※Flatness may be unobtainable with the value.

  • Oriimec Corporation of America
    1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
    TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319
    Tech. Support : 1-(859)746-3314
    Parts&Others : 1-(859)746-3316
    Fax: 1-(859) 746-3319