- 1-point coiling with a wire diameter of 0.08 to 0.3 mm
-Equipped with 8 standard axes: feed, cut, pitch, point, torsion, initial tension, coil front-back, and MSD-1.
-Easier setup and greater speed than previous models, as the cut axis and torsion axis are separated.
-Suitable for high-speed production of ballpoint pen springs, torsion springs, and elliptical springs in addition to standard cylindrical springs.
-Optional ultra-thin wire attachment can be used to coil springs with a diameter of 0.08 mm or less.
- Dedicated MNO Program for Spring Production
-Easy operations for quicker preparation.
-High resolution for controlling the latest servo motors.
-Compatible with compression spring creation programs based on line graphs.
-Allows varied control based on measurement results, such as the pitch and diameter.
-Common program for both torsion machines and coiling machines.
-Includes a motor sensor system.
-Versatile production management screen and production data collection function.
- 3 types of wire guides
The SH-3II has 3 wire guides with different lengths:
-Short guide with a guide length of 23 mm
Provides greater accuracy for short springs due to its shorter guide length, while retaining the same clearance length as a standard wire guide.
-Standard wire guide with a guide length of 30 mm
Enables use of all tools available for the previous SH-3 wire guide.
-Wire guide for ultra-thin wires with a guide length of 16 mm
Enables coiling of wires with a diameter of 0.08 mm or less.
- Taper synchronization constant
Enables the taper tilt to be managed with a value from 0 to 100.
Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.
- Optional Equipment
-Ultra-thin wire attachment
-3-dimensional bending servo unit to improve stability and speed when creating antenna springs
-Capacitance level sensor
–IS-1 shape detection unit with camera
|Standard||Wire Dia. 0.08～0.3mm||Arbor Axis(Option)||Resolution 0.001mm|
|Outside Dia. 10mm||Solenoid valves||4pcs(Max 8pcs available)|
|D／d 4 or more||Air requirements||Max 0.5 MPa|
|Ultra Fine Wire A/T||Wire Dia. 0.03 ～ 0.08mm||Power source||AC 200V 3-Phase, 15A|
|Feed Axis||Resolution 0.001mm||Net weight||400㎏|
|Cut Axis||Resolution 0.001°||Control device||Max. 9-axis to be controlled by computer
- OS Windows XP
|Pitch Axis||Resolution 0.001mm|
|Point Axis||Resolution 0.001mm||Display||17'' TFT color LC Display|
|Torsion A/T Axis||Resolution 0.001°||External memory||USB thumb drive|
|Initial tension Axis||Resolution 0.001mm||Service Temp.||0～40 deg. C(32-104 deg .F)|
- Oriimec Corporation of America
- 1840 Airport Exchange Blvd. #200 Erlanger, Ky 41018
TEL : Sales :1-(859) 746-3318 Fax: 1-(859) 746-3319 Tech. Support : 1-(859)746-3314 Parts&Others : 1-(859)746-3316 Fax: 1-(859) 746-3319